Transcend SATA III 6Gb/s SSD220Q 1TB

SKU
TS1TSSD220Q
£76.60 £63.83
In stock
Transcend Internal SSD, SSD220Q, 1TB, 2.5", SATA III 6Gb/s, 550/500 MB/s
Transcend's SATA III 6 Gb/s SSD220Q uses the latest QLC NAND technology, which employs a higher density of storage cells. By using high-quality flash memory and enhanced firmware algorithms, the SSD220Q delivers greater performance and reliability. Less is More Featuring QLC NAND Flash, SSD220Q's storage density per cell boosts 33%. More storage capacity is unleashed for more data. Your performance is no longer limited. Unlock your potential now! Performance Boost for Everyday Computing Taking full advantage of the SATA III 6 Gb/s interface and built-in SLC caching technology, Transcend's SSD220Q achieves exceptional transfer speeds of up to 550 MB/s read and 500 MB/s write. Guaranteed Endurance and Reliability Transcend's SSD220Q offers great terabytes written (TBW) values (up to 200 TBW) indicating the total amount of data you can write on the drive over its lifetime. RAID engine and LDPC coding Detects and corrects transfer errors to prevent data corruption. Garbage Collection Relocates existing data to release memory blocks. Wear-leveling Distributes data evenly across memory cells to prolong SSD's lifespan. DevSleep Intelligently shuts down SATA interface when not in use to prolong device's battery life A better choice than HDD Solid-state drives dominate the market for PC upgrades because they are faster and lighter than traditional hard disk drives. SSDs also consume less power, create less noise when in operation, and are more shock-resistant than hard drives. 3 easy steps to upgrade your PC Transcend's SSD220Q measures just 6.8 mm in height and features short access times, making it a perfect choice for upgrading desktops, laptops, and the latest gaming consoles in just three easy steps! SSD Scope software Transcend SSD Scope is advanced, user-friendly software that makes it easy to ensure your Transcend SSD remains healthy, and continues to run fast and error-free by determining the condition and optimizing the performance of your drive. Guaranteed quality Transcend’s solid state drives are built to the highest standards and rigorously tested, and offer outstanding quality, performance, and reliability.
SKU TS1TSSD220Q
EAN 0760557848912
Specification
Hard drive
SSD capacity1000 GB
Memory typeQLC 3D NAND
Performance
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Mac operating systems supportedNo
Linux operating systems supportedKernel 2.6.31
InterfaceSerial ATA III
Low-density parity-check (LDPC)Yes
DevSlp (device sleep) supportYes
Active garbage collectionYes
TBW rating200
SSD capacity1000 GB
S.M.A.R.T. supportYes
Read speed550 MB/s
TRIM supportYes
RAID supportYes
Write speed500 MB/s
Memory typeQLC 3D NAND
Random write (4KB)59000 IOPS
Random read (4KB)57000 IOPS
Native Command Queuing (NCQ)Yes
Mean time between failures (MTBF)2000000 h
Data transfer rate6 Gbit/s
Compatible productsMicrosoft Windows 7 Microsoft Windows 8 Microsoft Windows 10 Linux Kernel 2.6.31 or later
Data transmission
Read speed550 MB/s
Write speed500 MB/s
Random write (4KB)59000 IOPS
Random read (4KB)57000 IOPS
Data transfer rate6 Gbit/s
Endurance
Mean time between failures (MTBF)2000000 h
Certificates
CertificationCE/FCC/BSMI/KC/RCM
Design
CertificationCE/FCC/BSMI/KC/RCM
SSD form factor2.5"
System requirements
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Mac operating systems supportedNo
Linux operating systems supportedKernel 2.6.31
Features
InterfaceSerial ATA III
Low-density parity-check (LDPC)Yes
DevSlp (device sleep) supportYes
Active garbage collectionYes
TBW rating200
SSD capacity1000 GB
Windows operating systems supportedWindows 10, Windows 7, Windows 8
S.M.A.R.T. supportYes
Read speed550 MB/s
TRIM supportYes
RAID supportYes
Write speed500 MB/s
Mac operating systems supportedNo
Linux operating systems supportedKernel 2.6.31
Memory typeQLC 3D NAND
Random write (4KB)59000 IOPS
Random read (4KB)57000 IOPS
Native Command Queuing (NCQ)Yes
Mean time between failures (MTBF)2000000 h
Data transfer rate6 Gbit/s
CertificationCE/FCC/BSMI/KC/RCM
SSD form factor2.5"
Compatible productsMicrosoft Windows 7 Microsoft Windows 8 Microsoft Windows 10 Linux Kernel 2.6.31 or later
Harmonized System (HS) code84717070
Power
Operating voltage5 V
Operational conditions
Operating temperature (T-T)0 - 70 °C
Technical details
InterfaceSerial ATA III
S.M.A.R.T. supportYes
Operating temperature (T-T)0 - 70 °C
TRIM supportYes
RAID supportYes
Native Command Queuing (NCQ)Yes
SSD form factor2.5"
Software
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Mac operating systems supportedNo
Linux operating systems supportedKernel 2.6.31
Weight & dimensions
Width100 mm
Weight45 g
Height69.8 mm
Depth6.8 mm
Manufacturer Transcend
In Stock Y