Axis 01817-001 security camera accessory Cover

5506-951

5507-461

5507-451

5507-641

5901-331

Designed for PTZ and multi-sensor cameras, AXIS T91G61 Wall Mount accommodates and safely protects accessories inside the mount. Quickly and easily, connect power and data via pre-mounted Ethernet cable with IP66 RJ45 connector. Thanks to its impact-resistant and outdoor proven material, the mount suits all environments, both indoors and outdoors. AXIS T91G61 has the same hole pattern as the standard Axis PTZ wall mount and for retrofit, a pattern that matches Pelco's PTZ camera mount to enable an easy switch - no additional drilling is required. It can be mounted on poles and corners with the help of optional accessories. Note that this mount is not intended for inverted installations.

The outdoor and indoor, AXIS T91B51 Ceiling Mount is ideal where a PTZ dome or a fixed dome camera needs to be installed in low ceilings or in roof overhangs. If a longer length is needed, two optional extension pipes are available, 30 cm (12 in) and 100 cm (39 in). The ceiling mount is designed to swing and not break if hit by forklifts or tall vehicles. It can also be installed in sloped ceilings thanks to the ball joint, which ensures that the camera is still hanging straight.

AXIS T91B50 Telescopic Ceiling Mount is ideal where a PTZ /fixed dome camera needs to be installed in a high ceiling. The telescopic functionality allows the installer to adjust the length in an easy and secure way (up to 2 m/79 in). If a longer length is needed, two extension pipes are available, 30 cm (12 in) and 100 cm (39 in). The mount is designed to swing and not break if hit by forklifts or tall vehicles. It can also be installed in sloped ceilings thanks to the ball joint, which ensures that the camera is still hanging straight.

Designed for fixed dome cameras, AXIS T91H61 Wall Mount accommodates and safely protects accessories inside the mount. Connect to power and data quickly and easily with the built-in RJ45 cable and connection. Designed to be impact- and weather-resistant, this mount is suitable for all environments both indoors and outdoors. It can be mounted on poles and corners with the help of optional accessories.

AXIS T94J01A is an aluminum wall mount suitable for Axis positioning cameras and positioning units. It is compatible with Axis ACI 3/4” conduit adapters, and offers six cable entries. Cables can be routed through the back or, by using a conduit connection, from each side or from the bottom.

Wall Mount, Indoor / Outdoor, Impact-Resistant, White

T91B51 CEILING MOUNT

10 kg max, ±45°, 1151 - 2136 mm, IK10

AXIS T91H61 Wall Mount

T94J01A Wall Mount

Axis

Axis

Axis

Axis

Axis