Axis 02421-001 security camera accessory Cable box

5900-332

5507-461

0913-001

01190-001

01470-001

Power over Ethernet (PoE) offers an easy, fast and cost-effective solution for powering network products. A midspan injects power and data to the network device with built-in PoE support. No need to replace existing Ethernet switches and cabling infrastructure. AXIS T8134 60 W Midspan provides 60 W (two times IEEE 802.3at) that is required when operating e.g. AXIS Q60-E Network Cameras in temperatures below -20 °C (-4 °F).

The outdoor and indoor, AXIS T91B51 Ceiling Mount is ideal where a PTZ dome or a fixed dome camera needs to be installed in low ceilings or in roof overhangs. If a longer length is needed, two optional extension pipes are available, 30 cm (12 in) and 100 cm (39 in). The ceiling mount is designed to swing and not break if hit by forklifts or tall vehicles. It can also be installed in sloped ceilings thanks to the ball joint, which ensures that the camera is still hanging straight.

AXIS FA1105 is ideal for highly discreet indoor surveillance applications in stores and banks, and when integrated in machines. It can be installed in tight places and flush-mounted in a wall, ceiling or metal panel with only a small hole visible for the lens. For use with an AXIS FA Main Unit, AXIS FA1105 provides a 1080p resolution and a wide 111º horizontal field of view. AXIS FA1105 uses Forensic WDR (wide dynamic range) that is tuned for motion. The unit comes with a mounting bracket and an 8-m (26 ft.) cable for connection to a main unit.

AXIS T94S01P Conduit Back Box is an outdoor-ready, impact resistant (IK10+) back box designed to be mounted behind a wide range of Axis network cameras. It has an ingress-protected (IP66/IP67) compartment for secure storage of connectivity devices. Examples include storing an IP-over-COAX adapter to re-use legacy cabling or a network cable coupler to bridge between rigid and flexible network cables. AXIS T94S01P enables both camera and connectivity device to be safely mounted at the same point, without need for extra cabinet installation (even directly onto junction boxes). The finished installation is both aesthetically pleasing and able to withstand challenging outdoor conditions.

AXIS T91B57 Pole Mount is a high-quality pole mount designed for use with selected AXIS T91 wall mounts and AXIS T98A cabinet series. It is easily adjustable to fit poles with a diameter between 100–410 mm (4–16 in). The pole mount has an IK10 rating for impact resistance, which safeguards it against vandalism. It features a closed back and a cable gasket, which means it is also protected against insect infestation.

60 W Midspan, f / Axis PTZ Cameras, EUR

T91B51 CEILING MOUNT

Highly discreet indoor surveillance in 1080p

T94S01P Conduit Back Box

T91B57 POLE MOUNT 100-410MM

Axis

Axis

Axis

Axis

Axis