Bosch NDA-7100-PEN security camera accessory Pendant arm

0433-001

5506-951

5507-451

5901-331

5901-341

AXIS T92E20 protects Axis fixed network camera in adverse conditions. An internal shell stores heat in cold environments, and fan ventilation transfers excess heat to the outer chassis for efficient cooling in hot environments. Arctic Temperature Control ensures that the camera can start up even at -40 °C (-40 °F) following a power failure. One-cable installation with Power over Ethernet or High Power over Ethernet connection. AXIS T92E20 is IP66- and NEMA 4X-rated against the ingress of dust, rain, high pressure water jets and damage from external ice formation. It is also IK10-rated for protection against impact and vandal acts.

Designed for PTZ and multi-sensor cameras, AXIS T91G61 Wall Mount accommodates and safely protects accessories inside the mount. Quickly and easily, connect power and data via pre-mounted Ethernet cable with IP66 RJ45 connector. Thanks to its impact-resistant and outdoor proven material, the mount suits all environments, both indoors and outdoors. AXIS T91G61 has the same hole pattern as the standard Axis PTZ wall mount and for retrofit, a pattern that matches Pelco's PTZ camera mount to enable an easy switch - no additional drilling is required. It can be mounted on poles and corners with the help of optional accessories. Note that this mount is not intended for inverted installations.

AXIS T91B50 Telescopic Ceiling Mount is ideal where a PTZ /fixed dome camera needs to be installed in a high ceiling. The telescopic functionality allows the installer to adjust the length in an easy and secure way (up to 2 m/79 in). If a longer length is needed, two extension pipes are available, 30 cm (12 in) and 100 cm (39 in). The mount is designed to swing and not break if hit by forklifts or tall vehicles. It can also be installed in sloped ceilings thanks to the ball joint, which ensures that the camera is still hanging straight.

AXIS T94J01A is an aluminum wall mount suitable for Axis positioning cameras and positioning units. It is compatible with Axis ACI 3/4” conduit adapters, and offers six cable entries. Cables can be routed through the back or, by using a conduit connection, from each side or from the bottom.

The high-quality AXIS T94N01G Pole Mount is designed for use with Axis positioning cameras, positioning units and AXIS T98A cabinet series. It is easily adjustable to fit poles of between 100-410 mm (4-16 in) in diameter. AXIS T94N01G is made from marine-grade (SUS 316L) stainless steel and is suitable for marine, underground, and other high corrosion applications. The pole mount has an IK10 rating for impact resistance, which safeguards it against vandalism. It features a closed back and a cable gasket for protection against insect infestation.

T92E20, PoE, f/ M11, P13 Series & Q1755, White

Wall Mount, Indoor / Outdoor, Impact-Resistant, White

10 kg max, ±45°, 1151 - 2136 mm, IK10

T94J01A Wall Mount

T94N01G Pole Mount

Axis

Axis

Axis

Axis

Axis