Lindy 300m Cat.6 VGA and Audio Extender

ST121SHD50

HDBOOST4K

70456

VLHDMIEXT1-TV2

VLHDMIEXT1-RV2

Extend HDMI® up to 165ft (50m) over Cat5e/6 cabling with Power over Cable to Receiver

The ST121SHD50 HDMI® over Cat5e/Cat6 Video Extender kit lets you extend HDMI video and audio by up to 165 feet (50 Meters) over dual Cat5e cables or dual Cat6 cables. For added versatility the kit features Power Over Cable and only requires a single power adapter that can be connected to either the Transmitter or Receiver.

With support for High-Definition resolutions of up to 1920x1080 / 1080p and the accompanying digital audio, this cost-effective HD extender can easily be installed using new or existing Ethernet infrastructure wiring. For a convenient plug-and-play installation, the HDMI extender features built-in EDID monitor emulation, which ensures native resolution and maximum compatibility with your display or projector.

For added flexibility and convenience, HDMI cables up to 32ft (10m) can be connected to both the local and remote units, which lets you extend your HDMI signal to even further distances.

The HDMI extender kit offers a point-to-point digital signage solution right out of the box, including both local transmitter and remote receiver units, along with optional hardware that lets you mount the units as needed. Plus, with Power Over Cable, you can easily extend an HDMI signal in areas where access to power outlets is limited.

This product is TAA compliant and backed by a Startech.com 2-year warranty with free lifetime technical support.

The StarTech.com Advantage

Use this repeater to amplify your 4K HDMI signal and extend it 30 ft. using a standard HDMI cable

This 4K HDMI® signal booster lets you increase the signal strength of your HDMI video source so it can travel greater distances using standard HDMI cables. You can achieve resolutions up to 4K at 60Hz at distances of up to 30 ft. (10 m), and depending on your desired resolution, the booster supports distances up to 115 ft. (35 m) away at 1080p 60Hz resolution.

To install the booster, place it between two HDMI cables. Reference the table below for supported resolutions and cable lengths.

Cable length

from source

Cable length

to display

Total cable length

Maximum

resolution

50 ft. (15 m)

65 ft. (20 m)

115 ft. (35 m)

1080p (60 Hz) - 1920x1080

32 ft. (10 m)

50 ft. (15 m)

82 ft. (25 m)

4K (30 Hz) - 3840x2160

15 ft. (5 m)

15 ft. (5 m)

30 ft. (10 m)

4K (60 Hz) - 3840x2160

Maintains Ultra HD 4K video signals at 60Hz

When you're extending HDMI over distances using standard video cabling, higher resolutions from your HDMI 2.0 devices can become unavailable after a few feet. Using this HDMI signal booster ensures that HDMI 2.0 resolutions up to UHD 4K at 60Hz are available even at distances up to 30 ft. (10 m).

You can achieve even longer distances at lower resolutions -- up to 4K at 30Hz, at up to 82 ft. (25 m), and 1080p at 60Hz at up to 115 ft. (35 m).

Easy and discreet installation

With its small form factor design and no external power adapter, the HDMI booster is easy to hide, for a discreet installation. By extending your video signal using standard HDMI cables, the 4K booster is a cost-effective alternative to more expensive extension systems that require the installation of a CAT5 or CAT6 cabling infrastructure.

Supports a variety of distances

Support for a variety of extension distances makes the booster perfect for multi-device deployment across large institutions, such as boardrooms in corporate offices, classrooms in schools, or waiting rooms in hospitals, as these applications may require varied distances in different rooms.

Note: To achieve resolutions up to 4K60, your video source, display and cabling must support HDMI 2.0.

The HDBOOST4K is TAA compliant and backed by a 2-year StarTech.com warranty with free lifetime technical support.

The StarTech.com Advantage

The Lindy 150m Cat.6 TosLink (Optical) and Coaxial Digital Audio Extender is a high-quality solution for extending digital audio signals over long distances, using standard network cable. With TosLink (Optical) and coaxial inputs and outputs, this extender can be easily used with a variety of AV source devices including TVs and amplifiers, with speakers or soundbars located at the receiver side.Connected audio can be output simultaneously to provide splitting functionality from a single input, great for smaller audio broadcasting setups in underground railway stations, bus depots or medical facilities. This also allows simple conversion of TosLink and Coaxial signals into their opposing output.

Supporting both stereo and multi-channel audio extension, this extender will allow for impressive three-dimensional surround sound performance to compliment films and games when connected to the audio source device, as well as crystal clear speech from user generated audio. This provides the user with an excellent point to point solution, ideal for use in immersive residential cinema rooms or creating a more attractive and enticing retail experience.

PoC (Power over Cable) functionality, the supply of power and data signals over Cat.6 cable on a point to point connection between the transmitter and receiver also brings additional flexibility as only one power supply is required at the transmitter unit, ideal when power outlets are limited at the receiver end of the installation.

Please note: simultaneous output is only possible when identical 96KHz sample rates are used

Transmitter unit with IR transmitter Max resolution 1080P@60hz


VLHDMIEXT1-TV2 is transmitter for VLHDMIEXT1-RV2


It can extend video/audio/IR with a resolution of 1080P@60 Hz up to 120 meters via single network cable (Cat 5e/6)


Up to 253 receivers can be connected to one transmitter using Gbit switch.
One receiver will occupy 18Mbit bandwith.


Note that this product is not compatible with HDBaseT receivers


Typical installation:
It can be installed anywhere to extend HDMI signal up to 120m including AV/IR control signals


E.g. Private installation, Info screens in Shops or offices


Function:
HDMI extender
Point to point,Tx to Rx for 120m 1080P@60Hz
Signal can be spitted with a GBit Switch to several receivers
One receiver device only occupy 18M bandwidth.


Key features:
Super cost-effective HDMI extender over IP network
TX: 192.168.1.210
RX: 192.168.1.220

Receiver unit with IR receiver Max resolution 1080P@60hz
VLHDMIEXT1-RV2 is a receiver part for VLHDMIEXT1-TV2

It can extend video/audio/IR with a resolution of 1080P@60 Hz up to 120 meters via single network cable (Cat 5e/6)

Up to 253 receivers can be connected to one transmitter using Gbit switch. One receiver will occupy 18Mbit bandwith.

Note that this product is not compatible with HDBaseT receivers

Typical installation:
It can be installed anywhere to extend HDMI signal up to 120m including AV/IR control signals
E.g. Private installation, Info screens in Shops or offices

Function:
HDMI extender
Point to point,Tx to Rx for 120m 1080P@60Hz
Signal can be spitted with a GBit Switch to several receivers
One receiver device only occupy 18M bandwidth.

Key features:


Super cost-effective HDMI extender over IP network
TX: 192.168.1.210
RX: 192.168.1.220

StarTech.com HDMI Over CAT5e / CAT6 Extender with Power Over Cable - 165 ft (50m) HDMI Video/Audio Over Dual Ethernet Cable Extender (ST121SHD50)

StarTech.com HDMI Signal Booster - HDMI Repeater Extender - 4K 60Hz

150m Cat.6 TosLink (Optical) and Coaxial Digital Audio Extender

HDMI over IP 120m 1:253 + IR, Transmitter

HDMI over IP 120m 1:253 + IR, Receiver

StarTech.com

StarTech.com

Lindy

VivoLink

VivoLink